Train99 Forum

Discussion Boards => How To and Technical Information => Topic started by: romiin on August 04, 2021, 06:56:01 AM

Title: engine swap question
Post by: romiin on August 04, 2021, 06:56:01 AM

 I was looking at buying a 253 loco for parts,.  Can someone tell me if the engine from a 253 will fit into a 252 loco. Thanks

Title: Re: engine swap question
Post by: Terry on August 04, 2021, 01:19:14 PM

As long as they are both hand reverse units, the same motor is used in both. The hand reverse mounts to the frame of the 253, and the motor on the 252. It will just move over.

The 253E motor with the 2-position e-unit is wider due to the e-unit. You'd have to remove the e-unit or modify the 252 frame.  I get $20-30 and sometimes more for the reverse units on eBay. So if you bought a 253E you could remove the reverse unit and sell it on eBay.

Title: Re: engine swap question
Post by: romiin on August 04, 2021, 02:18:31 PM

 Thanks Terry.. that helps a lot. Loco